Fub Anti-Corrosive Fluorine Plastic Sand Slurry Centrifugal Chemical Process Pumps

• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Model NO.: FUB
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Capacity: 3~2600m3/H
• Head: 50m
• Pressure: ~1.6MPa
• Temperature: -20~105degree
• Standard: GB/T5656
• Rotation Speed: 980/1450/2900
• Package: Plywood Box
• Transport Package: Plywood Box
• Trademark: Feiyue
• Origin: Jiangsu, China
• Production Capacity: 5000

Product Description

FUB Anticorrosive Fluorine Plastic UHMWPE Sand Slurry Centrifugal Chemical Process Pump

Product Description

 

Conform to design standard of ISO2858/GB/T5656
Flow range: 2~600m²/h
Lift range: ~50m
Design pressure: ~1.6MPa
Application temperature: -20~+105ºC
Application field: This series of pump is mainly used in industries of oil refinery,petrochemical industry,coal chemical industry, power plant, environmental protection engineering, polluted water treatment and cement plant,etc.
Suitable for transporting all kinds of clean, particle free or particle contained slurry, polluted water, neutral or corrosive medium.

General

This pump series is a cantilever-type horizontal single-stage-single-suction centrifugal pump. Its flow contact parts a-re made of steel-lined polyethylene with ultra-high molecular weight(UHMWPE). The material is a new corrosion-and-abrasion-resistant engineering plastic for the use of pump in the world. Its unique features are good resistance to abr-asion, good resistance to shock(specially for low temperature shock), resistance to creep deformation(resistance to crack resulted from ambient stress). and excellent resistance to corrosion.
The pump is of remarkable characteristics: multifunction, i.e. The pump is suitable for many working conditions. For example, it can be used in conveying acid and alkali clear liquids of slurry. varieties of corrosive mine slurries of meta-llurgical industry, varieties of thin acids of sulfuric acid industry, varieties of waste water of environment protection in-dustry, etc. Because of the resistance to corrosion and abrasion, it is widely used.

Brief introduction to main technical properties

1.Model:FUB series
2.Characteristics: resistance to corrosion and abrasion, one pump for multiple uses, suitable for acid and alkali clear liquids or slurries.
3.Structure: (1)the pump body is made of with poly-thene with ultra-high molecular weight.Embedded pieces of steel reinforcement, Over-current components up to 20-40mm thick, wear and tear to extend the effective life. And easy sol-ution to the steel liner of plastic off phenomenon.
(2)The blade wheel has two types: open type and closed type. It can be optionally chosen according to conditions of media.
(3)Seal:K-type dynamic seal.
4.Applicable media:sulfuric acid with concentration of less than 80%, nitric acid with concentration of less than 50%, hydrochloric acid with various concentration, liquid alkali, etc. It is used not only for clear liquid, but also for slurry.
5.Main technical data:working temperature: -20ºC -80ºC (for special requirements and improved materials, the temp-erature can be up to 105). Inlet diameter:Ø32mm-Ø250mm.Flow:5-600m³/h.Lift: not more than 50m.

Chart

1	Pump body	2	After the pump cover	3	Bearing box	4	Axle sleeve	5	Bearing cover	6	Axle
7	Lock nut	8	Impeller nut	9	Impeller	10	Before the pump cover	11	Seal letter	12	Seal cover
13	Lock nut	14	Bearing

 

Product Parameters

Performance parameters of the table

 

 

 

 

Company Profile

FAQ