Fgy High Temperature Solid-Free Solution Transfer Submerged Pump (VS1)

• Customization: Available
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Model NO.: FGY
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Open
• Usage: Pump, Pumps, Vertical Pump
• Temperature: ~850degrees
• Transport Package: Plywood Box
• Trademark: Feiyue/Kalen
• Origin: Jiangsu, China
• HS Code: 841370
• Production Capacity: 5000

Product Description

Product Description

Fgy High Temperature Solid-Free Solution Transfer Submerged Pump(VS1)
 

Product Description

 

Conform to design standard of API610
Flow range:2~1600m³/h
Lift range:~100m
Design pressure: 5MPa at most
Application temperature:550ºC/850ºC
Application field: Transport all kinds of high temperature medium such as high temperature melted salt, high temperature melted slag, liquid lead and aluminum etc. Mainly used in high temperature medium delivery and heat transfer conditions such as nuclear power, solar power, chlor-alkali chemical industry, phthalic anhydride, maleicanhydride, acrylic acid, fluorine chemical industry, cryogen, aluminum oxide, melamine and organic chemical industry.
 

 

General
Next pump in liquid in fusil hydrochloric in series heat in FGY type,is RY my factory to produce at many year in the type fusil hydrochloric pump foundation according to the demand of the customer,consult abroad of the same kind type product of The construction proceeds the RY type that develop the design promotes to higher grade to change the on behalf product.
The series of FGY than act for the product RY type fusil hydrochloric pump product line more perfect.The dervice lifte is more long,combining to transport from the single the salt of fusil,then converting in to divided by the fusil hydrochloric Salt outside,can be used as at the same time the heat chemical engineering material transport.
The series of FGY considers to spread the cooling that move the part well on the design,transporting Lying the saturated steam in quality seals complletely to wait the work circumstances term,makinng to the original RY type pump construction A flood of improvement and pass to experiment the proceeding verification:
1.The bearinngs part establishes the cooling device,making bearinngs work environment not summit to and high the temperature lies the influence of the quality.
2.Cool off the water to get in touch with stalk directly,lie the heat of the quality can t spread because of stalk pass to turn to move the part.
3.Special construction,insure cooling water absoluteness not enter to lie the quality.
4.Need not to maintain to bear the heat seal completely the device,makinng is transported to lie the quality satisfied Divert unlikely with the steam,(special at work circumstances that transport the meltdown salt,even the saturated steam in a little amount and second nitrate also is harmful to the human bydy,cancer-causing.)
The variety bears the heat and bear the corrosion bears the combination that whet the material,makinng next pump in FGY series heat liquid been applicable to not only such as:film type method solid alkali,the organism fluorin break lies two dollars,three dollar a heat for of the fusil hydrochloric,and also can use in phosphate fertilizer,petroleum break solution etc.Device fluid of the usage transports.Because eradicating completely thoroughly the calories spreads to spread to move the part,for this reason FGY series pump than the next pump(fusil hydrochloric pump)in liquid in heat in type of the same kind life span increases consumedly.

Meaning of model code
B-Material code number 37-Head(m)Y-upright pump G-heat 100-Capacitym3/h

Chart

1	Water absorption section	2	Pump body sealing gasket	3	Interstage bushings	4	Bushing	5	Pump body sealing gasket	6	Interstage bushings
7	Bushing	8	To take over the sealing gasket	9	Under the takeover	10	Intermediate shaft sleeve	11	To take over the sealing gasket	12	Middle bushing
13	On taking over	14	Pressurized water period	15	Transmission components	16	Coupling	17	Impeller	18	Pump body
19	Impeller	20	Pump body	21	Packing collar	22	Blades	23	Bearing	24	Bearing
25	Electric frame	26	Motor

1	Motor	2	Electric coupling	3	Electric frame	4	Pump coupling	5	Bearing gland	6	Round nut
7	On the bearing	8	Bearing box	9	Bearing box	10	Pump shaft	11	Bearing	12	Bearing gland
13	Middle frame	14	Blades	15	Packing gland	16	Packing 12x12	17	And a half of the flange		Floor
19	On taking over	20	Liquid pipe	21	Pump cover	22	Impeller	23	Impeller nut	24	Pump body
25	bushing	26	Under the collar	27	Bushing clamp	28	Under the takeover	29	Guide bearing body	30	On the liner
31	On the collar

Product Parameters

Performance parameters of the table

Company Profile

FAQ