• API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering
  • API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering
  • API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering
  • API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering
  • API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering
  • API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering

API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering

Max.Head: >150m
Max.Capacity: >400 L/min
Driving Type: Motor
Impeller Number: Single-Stage Pump
Working Pressure: High Pressure Pump
Influent Type of Impeller: Double-Suction Pump
Customization:

Contact Supplier

Diamond Member Since 2014

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company
  • Overview
  • Product Description
  • Chart
  • Product Parameters
  • Company Profile
  • FAQ
Overview

Basic Info.

Model NO.
Fbs (BB1)
Capacity
12000m3/H
Head
~200m
Temperature
-20~125degree
Pressure
~1.6MPa
Standard
ISO2858, GB/T5656
Rotation Speed
1450/2950
Package
Plywood Box
Transport Package
Plywood Box
Trademark
Feiyue
Origin
Jiangsu, China
Production Capacity
5000

Product Description

API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering
Product Description
Conform to design standard of ISO2858,GB/T5656
Flow range: 12000m2/h
Lift range: ~135m
Design pressure: ~1.6MPa
Application temperature: -20~125ºC
Aplication field: This series of pump is mainly used in industries of oil refinery, petrochemical engineering, low temperature engineering, coal chemical industry, power plant, environmental protection engineering, wastewater treatment, cement plant etc.
Suitable for transporting circulating water and wastewater medium of chemical process.
API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering

 

Summary
Compared with other similar pumps, Model - S horizontal axially split pump of FEIYUE pump INDUSTRY is featured with long life,high effciency, reasonable structure, low operating cost, convenient installation and repair, etc. It is an ideal pump for fire fighting, air-conditioning, chemical, water treatment and other industries.

Pump body
The designed pressures of the pump are 1.6Mpa and 2.0 Mpa. In order to meet different users' requirements around the world, the relevant inlet and outlet flages of pump body can be chosen according to ANSI, PN and JIS standards. These inletand outlet flanges are all installed in the lower part of pump body, so the rotor can be taken out without disassemb-ling pipelines of the system, and it is convenient to repair. Part of the pump body adopts a double - flow - passage stru-cture in design, which can lower the radial force and extend the life of the mechanic seal and the bearing.

Blade wheel
The hydraulic design of the blade wheel uses the up-to-date CFD technology, which can improve the hydraulic efficiency of the pump. The blade wheel has been made in a dynamic balance, so as to make sure that model-S pump can run very smoothly.

Shaft
The diameter of the shaft is big, while the gap between bearings is short. This can lower the deflection of the shaft, so as to extend the life of the mechanic seal and the bearing.

Shaft casing
For model-S' pumps, the shaft casing can be made of many different materials, so as to protect the shaft from co-rrosion and abrasion. The shaft casing can be replaced.

Abrasion ring
Areplaceable abrasion ring is installed between the pump body and blade wheel, so as to protect the pump body and blade wheel from abrasion. It is convenient to replace. This results in low maintenance cost, guarantees enough runn-ing gap and high efficiency.

Stuffing
The pump with unique stuffing design can use not only stuffing, but also mechanic seal. The seal device can be replac-ed without disassembling pump cover.

Bearing
The unique bearing design makes it possible that the bearing can use either grease or thin oil for lubrication. The des-igned life of the bearing can be up to more than 100,000 hours. A double - row thrust bearing or closed - type bearing can also be used.

Materials
According to actual demands of users, the materials of model -S horizontal medium - open pump can be copper,cast iron, nodular cast iron, 316 stainless steel, 416 stainless steel, duplex steel. Hastelloy, monel mental, Titanium alloy, 20# alloy, etc.

Installment mode
Model - S pump can be installed in two ways: horizontal and vertical installments. The vertical installment can save flo-or space.
Chart

API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering

1 Pump body 2 Drive end bearing parts 3 Seal cover 4 Mechanical seal 5 Adjust the set of 6 Shaft sleeve
7 Seal flush pipe parts 8 Pump cover 9 Impeller 10 Pump body sealing ring 11 Axle 12 Against hydrosphere
13 Drive end bearing parts                    
Product Parameters

Performance parameters of the table

API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering
Company Profile

API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical EngineeringAPI610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering

FAQ

API610 Fbs (BB1) Axially Split Single Stage Double Suction Centrifugal Oil Pump for Petrochemical Engineering

Send your message to this supplier

*From:
*To:
avatar Mr. Jackie
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now