| Position of Pump Shaft: | Horizontal Pump |
|---|---|
| Capacity: | 2~600m3/H |
| Head: | ~50m |
| Pressure: | ~1.6MPa |
| Temperature: | -20~105degree |
| Standard: | ISO2858. GB/T5656 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
General
This pump series is a cantilever-type horizontal single-stage-single-suction centrifugal pump. Its flow contact parts a-re made of steel-lined polyethylene with ultra-high molecular weight(UHMWPE). The material is a new corrosion-and-abrasion-resistant engineering plastic for the use of pump in the world. Its unique features are good resistance to abr-asion, good resistance to shock(specially for low temperature shock), resistance to creep deformation(resistance to crack resulted from ambient stress). and excellent resistance to corrosion.
The pump is of remarkable characteristics: multifunction, i.e. The pump is suitable for many working conditions. For example, it can be used in conveying acid and alkali clear liquids of slurry. varieties of corrosive mine slurries of meta-llurgical industry, varieties of thin acids of sulfuric acid industry, varieties of waste water of environment protection in-dustry, etc. Because of the resistance to corrosion and abrasion, it is widely used.
Brief introduction to main technical properties
1.Model:FUB series
2.Characteristics: resistance to corrosion and abrasion, one pump for multiple uses, suitable for acid and alkali clear liquids or slurries.
3.Structure: (1)the pump body is made of with poly-thene with ultra-high molecular weight.Embedded pieces of steel reinforcement, Over-current components up to 20-40mm thick, wear and tear to extend the effective life. And easy sol-ution to the steel liner of plastic off phenomenon.
(2)The blade wheel has two types: open type and closed type. It can be optionally chosen according to conditions of media.
(3)Seal:K-type dynamic seal.
4.Applicable media:sulfuric acid with concentration of less than 80%, nitric acid with concentration of less than 50%, hydrochloric acid with various concentration, liquid alkali, etc. It is used not only for clear liquid, but also for slurry.
5.Main technical data:working temperature: -20ºC -80ºC (for special requirements and improved materials, the temp-erature can be up to 105). Inlet diameter:Ø32mm-Ø250mm.Flow:5-600m3/h.Lift: not more than 50m.
| 1 | |||||||||||
Performance parameters of the table
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}