API 610 Vs4 / Vs5 Semi Submersible Centrifugal Vertical Long Shaft Industrial Submerged Sump Vertical Phosphoric Acid Slurry Stainless Steel

Product Description

API 610 Vs4 / Vs5 Semi Submersible Centrifugal Vertical Long Shaft Industrial Submerged Sump Vertical Phosphoric Acid Slurry Stainless Steel  

Product Description

Conform to design standard of API610
Flow range: 10~400m²/h
Lift range: ~50m
Design pressure: 2.5MPa at most
Application temperature: -40~150ºC
Application field: Transport all kinds of solid particle contained neutral or strong corrosive medium.Mainly used in industries of oil refinery,petrochemical engineering,low temperature engineering,coal chemical industry, chemical fiber, and general industrial process,power plant, environmental protection engineering, marine industry, seawater desalination phosphoric acid, ammonium phosphate.

Summary
Model LJYA series slurry pump is a cantilever type single - stage - suction centrifugal submerged pump. Its blade whe-el is a semi-open type. In the front and back of the blade wheel installs an abrasio - resistant cover. The pump is widely used in chemical process for conveying medium containing less than 30% solid granules and with viscosity less than 200cp, which is subject to the interaction of corrosion and abrasion. It is especially suitable for conveying such medium as phosphoric acid, triammonium phosphorate slurry, etc. In general, the temperature of the conveying medium is less than 110ºC. When conveying medium with higher temperature, the bearing should be cooled with cooling water.Perfo-rmance scope: flow Q=10-400m²/h, Lift H=5-50m.
The FLX type series anticipates the syrup circulates to pump to 3~1000000/year in ton phosphorus ammonium engin-eering in side of an effect two effects anticipates syrup evaporate concentrated circulate of important kit Equipments, should pump to have efficient and high, vapor eclipse function good etc. Characteristics, is Replace the optimization product that import the equipments. That series pump is extensive at the same time should use for the other industry in chemical engineering,petroleum, metallurgy, deckle... Etc. Section.

Main manufacture materials and applicable medium.

Code	Applicable medium
CW-2(CD4MCu)	Suitable for diluted sulfuric acid,phosphoric acid by wet process, triammonium phosphate slurry. electrolyte of metallurgy of non-icrrous metals.
904,UB-6	Suitable for diluted sulfuric acid
CB7Cu	Weak corrosive sand slurry, slag slurry, as well as the camallite and halogen liquid in the production of potassium fertilixers.
316,Mo2Ti	Diluted nitrie acid, phospharie acld, organic acid and medium containing small amount of sulfuric acid or chlorion
304,18-8	Diluted nitric acid,organic acids.

Besides the above materials, other manufacture materials can also be chosen according to user's need.

Chart

1	Coupling	2	Electric frame	3	Bearing gland	4	Bearing sleeve	5	Bearing box	6	Bearing
7	Floor	8	Liquid pipe	9	Intermediate to take over	10	Pump shaft	11	Elbow	12	After the lining board
13	The impeller(open)	14	Before the liner	15	The impeller nut	16	Before the pump cover

1	Screen	2	Before the pump cover	3	Before the liner	4	Impeller	5	Pump body	6	After the lining board
7	Under the takeover	8	Shaft	9	Pay the impeller	10	Middle frame	11	Bearing gland	12	Bearing
13	Oil baffle	14	Bearing box	15	Gas pipe	16	Floor	17	Bearing box	18	On the bearing
19	Bearing gland	20	Coupling	21	Electric frame	22	And a half of the flange	23	Liquid pipe	24	Diffusion tube
25	Elbow

Product Parameters

Performance parameters of the table

Company Profile

FAQ