Vertical Turbine Long Shaft Centrifugal Pump
Product Description
Conform to design standard of ISO2858/GB/T5656
Flow range:2-4000m2/h
Lift range:5~125m
Design pressure:~2.5MPa
Application temperature:-80~250ºC
Application field: This series of pump is mainly used in industries of oil refinery, petrochemical engineering, coal chemical industry, power plant, low temperature engineering, pipeline pressure regulating,condensate extraction, environmental protection engineering, seawater desalinization, seawater lift, liquefied gas engineering, water treatment, water supply, water supply and drainage system, off-shore platform, tank ship. Suitable for transporting various clean or micro particle contained medium.
General
Model FCDL vertical long shaft pump series adopts submerged blade wheel and vertical installation structure.It has merits of compact structure, stable running, easy operation, convenient maintenance, small ground space, high degr-ee of versatility and standardization. It is an up-to-date mature product series researched and developed by our comp-any on the basis of absorption of advanced experiences on design and manufacture of vertical long shaft in the devel-oped countries with accommodation to the domestic market requirements.
The product has many applications including industrial water supply and drainage, tap water of city, living water and fire-fighting water, water pumping from river, lake and sea. It is used in industries of metallurgical, mine, chemical, pa-permaking, water power station, etc.
Meaning of model code
1-Outlet port diameter of pump(40-700). Unit:mm.
2-Code for FCDL vertical long shaft pump series.
3-Stage number of blade wheel(it can be omitted when stage number of blade wheel is 1).
4-Nominal total lift of pump. Unit:m.
5-Code of cutting blade wheel. Shown as A,B.
6-Pump middle pipe number N (0,1,2-it can be omitted when middle pipe number is 1).
Among them,1,2,3,4,5 are the basic model code of pump. 6 must be declared when the user is placing his order. Vertical long shaft pump with outlet port diameter of 350mm, 2-stage blade wheel, total lift of 60 m, and one time cutting.
Chart
| 1 |
Feed horn |
2 |
Impeller nut |
3 |
Last stage flow diverter |
4 |
Guide bearing body |
5 |
Interstage bushings |
6 |
Guide bearing gland |
| 7 |
Bushing |
8 |
Impeller |
9 |
Primary diverter |
10 |
Intermediate to take over |
11 |
Shaft |
12 |
Coupling collar |
| 13 |
1/2 snap ring |
14 |
Guide bearing |
15 |
On the shaft |
16 |
Floor |
17 |
Water pipe |
18 |
Packing collar |
| 19 |
Packing |
20 |
Packing gland |
21 |
Oil seal set |
22 |
Bearing |
23 |
Thrust head |
24 |
On the bearing |
| 25 |
Round nut |
26 |
Motor end coupling |
27 |
Elastic pole pin |
28 |
Pump end coupling |
29 |
Bearing gland |
30 |
Bearing |
Product Parameters
Performance parameters of the table
Company Profile
FAQ
){kind=link}