| Customization: | Available |
|---|---|
| Max.Head: | 110m-150m |
| Max.Capacity: | 18000m3/H |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Summary
Model LJYA series slurry pump is a cantilever type single - stage - suction centrifugal submerged pump. Its blade whe-el is a semi-open type. In the front and back of the blade wheel installs an abrasio - resistant cover. The pump is widely used in chemical process for conveying medium containing less than 30% solid granules and with viscosity less than 200cp, which is subject to the interaction of corrosion and abrasion. It is especially suitable for conveying such medium as phosphoric acid, triammonium phosphorate slurry, etc. In general, the temperature of the conveying medium is less than 110ºC. When conveying medium with higher temperature, the bearing should be cooled with cooling water.Perfo-rmance scope: flow Q=10-400m2/h, Lift H=5-50m.
The FLX type series anticipates the syrup circulates to pump to 3~1000000/year in ton phosphorus ammonium engin-eering in side of an effect two effects anticipates syrup evaporate concentrated circulate of important kit Equipments, should pump to have efficient and high, vapor eclipse function good etc. Characteristics, is Replace the optimization product that import the equipments. That series pump is extensive at the same time should use for the other industry in chemical engineering,petroleum, metallurgy, deckle... Etc. Section.
Main manufacture materials and applicable medium.
| 1 | Thrust bearing parts | 2 | Drive side sliding bearing parts | 3 | Beaing support | 4 | Rotor parts | 5 | Mechanical seal parts | 6 | Throttling set I |
| 7 | Throttling set II | 8 | Pump beast | 9 | Secondary guide plate | 10 | Mouth ring | 11 | High pressure in the middle | 12 | Guide vane |
| 13 | Shell | 14 | Level at the end of guide vane | 15 | Transition pipe | 16 | Throttling set Ill | 17 | Low pressure in the middle | 18 | Head in the middle |
| 19 | Head guide vane | 20 | Throttling set IV | 21 | Clamp | 22 | Drive side sliding bearing parts |
Performance parameters of the table
){kind=link}